Refinery and pipeline surface prep rated for explosion-proof environments. The NJ Turnpike refinery corridor (Linden, Bayway, Paulsboro) and PA petrochemical facilities need non-spark, non-abrasive cleaning that meets hot-work permit requirements.
Refinery and petrochemical environments prohibit open flames, sparks, and static-generating activities in classified hazardous areas. Sandblasting generates sparks on impact with ferrous metals. Manual grinding generates sparks and metal particulate. Chemical cleaning generates VOCs. All three require hot-work permits and extensive safety protocols.
Laser cleaning generates no sparks, no static discharge, and no VOCs. The laser beam is contained. The vaporized material is captured by HEPA filtration. Operations can proceed in classified areas with standard laser safety protocols.
Applications
USE CASE 01
Pipeline Coating Removal
Strip pipeline coatings for inspection, recoating, and repair without sparks or abrasive media. Laser cleaning works on API 5L and API 5CT grades. Prepare surfaces for FBE, 3LPE, and liquid epoxy recoating.
USE CASE 02
Heat Exchanger Tube Cleaning
Remove scale, fouling, and corrosion from heat exchanger tubes and tube sheets. In-place cleaning without pulling the bundle. Restore thermal transfer efficiency.
USE CASE 03
Tank and Vessel Surface Prep
Interior and exterior cleaning of storage tanks, pressure vessels, and columns. Remove rust, scale, and old coatings. Prepare for API 653 inspection and recoating.
Laser cleaning produces no sparks, no open flame, and no static discharge. It operates without abrasive impact on ferrous metals. Consult your facility safety team for area classification and permitting requirements specific to your location. We carry full OSHA compliance documentation.
FBE (fusion bonded epoxy), 3LPE, coal tar, asphalt, liquid epoxy, polyurethane, and zinc-rich primers. Multi-layer coating systems are removed in a single pass.